Site Plan Builder

Show

1Base image and scale

Upload satellite or site plan

Take a top-down screenshot in Google Earth or Google Maps (satellite view), then upload it. In the full app, typing an address will load this automatically, already to scale.

Scale

That line isft

Use a wall you measured, or the scale bar printed on the map.

2Building outline

Square corners (snap to 90°)

Click each corner in turn; click the first corner (or Close outline) to finish. Drag a corner to adjust it. Add another building with Trace a building again.

3Conditions

Elevation readings

Next valuein

Enter relative elevations in inches, as read on the manometer or level (for example 0, −0.75, −2.5). The highest reading is the reference; settlement is measured down from it.

Paste an elevation log

One reading per line, or separated by commas. Decimals or fractions (−1 1/4, 3/8). Labels such as "Pt 5:" are ignored. Then click the plan in the same order to place each one.

Settlement map and contours

Site notes

Note text

4Exterior piers

Click a wall to add or remove piers along it. Piers are numbered around the building.

Everyft,toft

Pier at each corner (1.5 ft in)

5Polyurethane

New zones are

Drag to draw (square tool: rectangle; triangle tool: triangle), or click corners for any shape. Select a zone from the list or by clicking inside it; drag its round handle to rotate, or the red × to delete. Holes fill the zone in the chosen pattern; spacing and DI depths follow the settlement at each hole.

Treatment zones

No zones yet. Pick a pattern above and draw one on the plan.

Selected holes

Click a hole; Shift-click to add more; drag across empty space to box-select.

Rules (company settings)

6Schedule

Wall lengths Pier numbers Reading values Base image